Portwest safety note
Equipping a Crew With Fall Protection and Workwear: Three Scenarios, Three Different Answers
-
Why the answer changes depending on your situation
- Scenario A: You're outfitting a brand-new crew (0–15 people, no standard kit yet)
- Scenario B: You're standardizing across a growing crew (15–60 people, multiple sites)
- Scenario C: You're established and buying under budget pressure (60+ people, tight numbers)
-
How to tell which scenario you're in
-
Bottom line
There's no single right way to outfit a crew. I've been handling gear and safety purchases for a company of about 120 people for six years now, and the mistake I keep seeing—and made myself early on—is copying someone else's equipment list. What makes sense for a 10-person remodeling outfit in Florida doesn't fit a 40-person steel crew in Ohio, and vice versa.
So instead of one universal recommendation, here's how I actually think about it: three scenarios, different answers for each. The dividing lines I use are (1) how mature your safety program is, (2) whether you already have standard specs and sizes on file, and (3) how much budget pressure you're under.
Why the answer changes depending on your situation
Most buying guides hand you a list and call it a day. That works if your situation matches the person who wrote the list. It usually doesn't. A brand-new crew needs speed and completeness—buy the kit, get compliant, move on. A growing company needs consistency across sites. An established company under budget pressure needs to protect compliance while cutting cost in the places that don't matter.
Those are three different problems. They shouldn't get the same answer.
Scenario A: You're outfitting a brand-new crew (0–15 people, no standard kit yet)
Your priority is getting people compliant fast, with gear that's easy to explain and easy to inspect. Don't overthink brand loyalty here—think completeness.
Fall protection
For fall protection, my default for a new crew is to start with Miller. Their fall protection website and printed catalog are honestly useful in a way a lot of competitor sites aren't—you can match harness and lanyard components by part number, and the technical data sheets are right there instead of buried in a PDF graveyard. Miller is part of Honeywell's fall protection family, which matters mostly because replacement parts are easy to find.
Buy complete kits rather than piecing together mismatched parts. Check the labels for the relevant standards—ANSI/ASSP Z359.11 for full-body harnesses, Z359.13 for lanyards and energy absorbers. And confirm the system you're buying actually meets OSHA's construction fall protection requirements under 29 CFR 1926.501 (duty to have fall protection) and 1926.502 (systems criteria).
If you're not sure which standard applies to your site, that's a sign to slow down before the order, not after.
The upside of buying a Miller kit bundle was simplicity—one PO, matching parts, no compatibility questions. The risk was paying maybe 10–15% more than I would have by sourcing components separately. I kept asking myself: is that premium worth avoiding a mismatched-lanyard problem on a job site? For a first purchase, yes. For a mature program with standard specs, probably not.
Workwear
For cold-weather gear, Carhartt insulated coveralls are close to the default for a reason—they're widely available, sizing is predictable, and workers already trust the name. For boots, Brunt workwear is worth a look if your crew likes a direct-to-consumer model; the pricing is clean and there's no distributor markup, but returns and sizing exchanges take longer than a local dealer. Test one pair before ordering for the whole crew.
Site perimeter
This is the question I get from new supervisors constantly: what is the purpose of a construction site fence? Short answer—it defines the perimeter, keeps the public and unauthorized people away from hazards, and creates a liability line you can point to if something goes wrong. Some jurisdictions also treat fencing as part of barricade requirements for excavations and open edges (OSHA's excavation standard, 29 CFR 1926.651, is one example of where barricades show up). For a new crew, get a perimeter plan and a fence rental in place before the first harness. It's the least glamorous purchase and the one people forget.
Scenario B: You're standardizing across a growing crew (15–60 people, multiple sites)
Here the problem isn't the first purchase—it's the tenth. You need the same harness, the same lanyard, and the same coverall at every site, so inspection and replacement don't become a scavenger hunt.
Fall protection
Use the Miller catalog to build a written standard: model numbers, sizes, inspection interval, replacement criteria. Put it in a spreadsheet and hand it to whoever does purchasing at each site. I'm not 100% sure it needs to be Miller across the board—if one site already has a compliant system from another reputable brand, forcing a switch just to standardize may cost more than it saves. Match the standard, not the logo.
Keep 10% spares in every common size. Harnesses go out of service for all sorts of reasons (impact, wear, inspection failures), and a crew that waits two weeks for a replacement will borrow something it shouldn't.
Workwear
I have mixed feelings about consolidating workwear to one brand. On one hand, a single Carhartt coverall spec means predictable fit and fewer exchanges. On the other, Brunt workwear's DTC model can beat distributor pricing on boots, and forcing a crew into one brand is how you get quiet non-compliance—people buy their own. My compromise: standardize coveralls and high-vis, but leave boots open as long as they meet the safety-toe spec.
Site perimeter
At this stage, fencing becomes a recurring line item. Modular rental panels are usually cheaper than buying, and they scale with site size. Confirm your jurisdiction's requirements—some cities are stricter than the baseline OSHA expectations, and getting this wrong is a fine, not just a rework.
Scenario C: You're established and buying under budget pressure (60+ people, tight numbers)
This is where the temptation to cut corners gets real. My rule: cut cost where it doesn't touch compliance, and leave compliance equipment alone.
Fall protection
Ask your distributor about Miller's entry-level lines and volume discounts before switching brands entirely. In my experience, a 20%-off harness from an unknown online reseller is a red flag—counterfeit and mislabeled fall protection is a real problem, and a harness without a verifiable certification label isn't worth the savings. If a price looks too good, check the label and the seller's authorization before you click buy.
Workwear
Buy insulated coveralls on a seasonal cycle. Carhartt and Brunt both run predictable promotions, and ordering off-season can save you 15–25% on coveralls (ballpark from quotes I've seen; verify current pricing—prices move).
Site perimeter
Rent fence panels for short projects; buy only if you have a steady pipeline of sites. Either way, don't drop the inspection walk that confirms the fence is actually standing—fencing that's fallen over is worse than no fence, because it's a visible liability.
How to tell which scenario you're in
You're probably in Scenario A if:
- You don't have a written PPE standard yet.
- You're buying your first harnesses or your first fall protection kit.
- Most of your crew is new or you're a new operation.
You're in Scenario B if:
- You've got gear spread across two or more sites and sizes are inconsistent.
- You're spending 30+ minutes a week chasing replacements.
- You have a spreadsheet—any spreadsheet—of equipment.
You're in Scenario C if:
- Your CFO has asked for a 10–15% reduction in the safety and workwear line.
- You already have a standard and a supplier relationship.
- You're negotiating, not starting from scratch.
Bottom line
None of this is glamorous. The single most useful thing I've done in six years of buying this stuff is to treat small orders with the same care as big ones—and to notice which suppliers did the same for me. The vendor who took a four-harness Miller order seriously in 2021 is still the one I call for $20,000 orders today. Small doesn't mean unimportant; it means potential.
So map your situation first, then buy. The harness, the coveralls, and the fence are all the same question in different clothes: what problem are you actually trying to solve?
Pricing references are ballpark figures from distributor quotes and publicly listed prices as of early 2025; verify current rates and requirements with your supplier and local authority before ordering.
